Original official author HTML, exact retained edition. Historical TeX conversion verdicts remain unchanged. Cited-edition alignment and mathematical self-containment are not assessed.
In this section we recall some basic facts about the algebraic
geometry of toric varieties and schemes. In the first place, we consider toric
varieties over a field and then toric schemes over a DVR. We refer
to [KKMS73, Oda88, Ful93, Ewa96] for more details.
We will use the notations of the previous section concerning concave
functions and polyhedra, with the proviso that the vector space
will always be equipped with a
lattice and most of the objects we consider will be compatible with
this integral structure, even if not said explicitly. In particular,
from now on by a fan (Definition 3.13)
we will
mean a rational fan and by a
polytope
we will mean a lattice polytope.
4.1. Fans and toric varieties
Let be a field and a split torus over .
We alternatively denote it by if we want to refer to
its field of definition.
Definition 4.1.
A toric variety
is a normal variety over equipped with a dense open embedding
and an action
that extends the action of on itself by
translations. When we want to stress the torus, we will call a
toric variety with torus .
Toric varieties can be
described in combinatorial terms as we recall in the sequel.
Let be the lattice of one-parameter
subgroups of and
its dual lattice of characters
of . For a ring we set and
.
To a fan we associate a
toric variety over by gluing together the affine toric
varieties corresponding to the cones of the fan.
For , let be the dual cone (Definition
3.67) and set
for the
saturated semigroup of its lattice points. We consider the
semigroup algebra
of formal finite sums of elements of with the natural ring
structure. It is an integrally closed domain of Krull dimension
. We set for the associated
affine toric variety.
If is a face of we have that
is a localization of . Hence there is an
inclusion of open sets
For , the affine toric varieties ,
glue together through the open subset
corresponding to their common face.
Thus these affine varieties glue together to form the
toric variety
This is a normal variety
over of dimension . When we need to specify the field of
definition we will denote it as .
We denote by
its structural sheaf and by
its sheaf of rational functions. The open
subsets may be denoted by when we want to include the ambient toric variety in the
notation.
The cone , that we denote simply by ,
is a face of every cone
and its associated affine scheme
is an open subset of all of the schemes .
This variety is an algebraic group over canonically isomorphic to
. We identify this variety with and
call it the principal open subset of .
For each , the homomorphism
induces an action of
on . This action is compatible with the inclusion
of open sets and so it extends to an action on the whole of
Thus we have obtained a toric variety in
the sense of Definition 4.1. In fact, all toric varieties are
obtained in this way.
Theorem 4.2.
The correspondence is a bijection
between the set of fans in and the set of
isomorphism classes of toric varieties with torus .
For each , the set of -rational points in
can be
identified with
the set of semigroup homomorphisms from to the semigroup
. That is,
In particular, the set of -rational points of the algebraic torus
can be written intrinsically as
Every affine toric variety has a distinguished rational point:
we will
denote by
the
point given
by the semigroup homomorphism
For instance, the point is the unit of .
Most algebro-geometric properties of the toric scheme
translate into combinatorial properties of the fan. In particular,
is proper if and only if the fan is
complete
in the sense that .
The variety is smooth if and
only if every cone can be written as
with
which are part of an integral basis of .
Example 4.3.
Let
be the fan in Example
3.70. The toric variety
is the projective space
.
More generally, to a polytope of maximal dimension we can
associate a complete toric variety , where
is the fan of Example 3.71.
4.2. Orbits and equivariant morphisms
The action of the torus induces a decomposition of a toric variety
into disjoint orbits. These orbits are in one to one correspondence
with the cones of the fan.
Let and set
(4.4)
where denotes the orthogonal space to .
We will denote by the projection of
lattices. By abuse of notation, we will also denote by
the induced projection of vector spaces.
The orthogonal space is the maximal linear space inside
and is the maximal subgroup sitting inside
the semigroup .
Set
which is a torus over of dimension .
The surjection of rings
induces a closed immersion
. In terms of
rational points, the inclusion sends a group homomorphism to the semigroup homomorphism obtained by extending by zero. In
particular, the distinguished point
belongs to the image of by the above
inclusion.
Composing with the open immersion , we identify with a locally closed
subvariety of . For
instance, the orbit associated to the
cone agrees with the principal open subset .
In fact, if
we consider as a rational point of , then agrees with the orbit of by .
We denote by the Zariski closure of with its
induced structure of reduced closed subvariety of .
The subvariety has a natural structure of toric
variety. To see it, we consider the fan
on
(4.5)
This fan is called the star of in .
For each with , set
. Then,
There is a surjection of rings
that defines a closed immersion . These maps glue together to give a closed immersion
.
Proposition 4.6.
The closed immersion induces an isomorphism
Proof.
Since the image
of each contains as a dense orbit, we
deduce the result from the construction of .
∎
In view of this proposition, we will identify with and consider it a toric variety.
We now discuss more general equivariant morphisms of toric varieties.
Definition 4.7.
Let , , be split tori over
, and a group morphism. Let
, , be toric varieties with torus . A
morphism is
-equivariant
if the diagram
is commutative.
A morphism is
-toric
if its restriction to agrees with . We say that
is equivariant or toric if it is -equivariant
or -toric, respectively, for some .
Toric morphisms are equivariant. Indeed, a morphism is
toric if and only if it is equivariant and sends the distinguished
point to the distinguished point
.
The inclusion
is an example of equivariant morphism that is not toric. Moreover,
the underlying morphism of tori
depends on the choice of a section
of the projection .
Equivariant morphisms whose image intersects the
principal open subset can be characterized in combinatorial terms. Let
, , be split tori over . Put
and let be fans in
.
Let be a linear map
such that, for every cone , there exists
a cone with , and let be a rational point.
The linear map induces a group homomorphism
Let , be cones such that
. Let
be the map dual to
. Then there is a homomorphism of semigroups which we also denote by .
For a monomial
we denote by its image in
. The assignment
induces morphisms of algebras
that, in turn, induce morphisms
These morphisms are compatible with the restriction to open
subsets, and they glue together into a -equivariant morphism
(4.8)
In case , the distinguished
point on the principal open subset of , this morphism
is a toric morphism
and will be
denoted as for short.
Theorem 4.9.
Let , , and , , be as
above. Then the correspondence is a
bijection between
(1)
the set
of pairs , where is a linear map
such that for every cone there exists
a cone with , and is a rational point of ,
(2)
the set of equivariant
morphisms whose image
intersects the principal open subset of .
Proof.
For a point , let be the morphism induced by the toric action. Denote by
the distinguished point of
the principal open subset of . The
correspondence establishes a bijection between the set
of equivariant morphisms whose image intersects the principal open subset of and the set of pairs , where is a toric morphism and is a rational point in the principal open
subset. Then the result follows from [Oda88, Theorem 1.13].
∎
General equivariant
morphisms
are obtained composing an
equivariant morphism of the form with the inclusion of as a toric
orbit of a third toric variety.
Example 4.10.
The restriction of to
the principal open subset
can be written in coordinates by choosing
basis of and of . Let be the rank of
. The chosen basis determine
isomorphisms , which give
coordinates
and for and , respectively. We write the the linear map with respect
to these basis as a matrix, and we denote its rows by
, . Write .
In these
coordinates, the morphism is given by
We now show how to refine the Stein factorization for an equivariant
morphism in
terms of the
combinatorial data.
Let , and be as in Theorem 4.9.
The linear map factorizes as
where is the image of and is the saturation of
with respect to . Clearly .
By restriction, the fan induces a fan in
this linear space. We will call this fan either or
, depending on the lattice we are considering.
Applying the combinatorial construction of equivariant morphisms, we
obtain a diagram
where the first morphism has connected fibres (see
[Oda88, Proposition 1.14]), the second morphism is finite and
surjective.
The third morphism is also finite and can be further factorized as a
normalization followed by a closed immersion. In general, consider a
saturated sublattice of , a fan in and .
Let be the induced fan in and
the inclusion of into .
Then,
we have a finite equivariant morphism
Set
and let be the dual of
.
Let and .
The natural semigroup homomorphisms factors as
The first arrow is the projection and will be denoted as ,
while the second one is the inclusion of into its
saturation with respect to . We have a diagram of -algebra
morphisms
where the left map is given by , and the right map is given by
.
Let be the closed subvariety of
given by the left surjection. Then we have
induced maps
These maps are compatible with the restriction to open subsets and so
they glue together into maps
(4.11)
Then is the closure of the orbit of under the action of
the subtorus of determined by , while
the toric variety is the normalization of .
When , the subvariety will be denoted
by for short.
Definition 4.12.
A subvariety of will be
called a toric subvariety
(respectively, a translated toric subvariety)
if it is of the form (respectively,
) for a saturated sublattice and
.
A translated toric subvariety is not
necessarily a toric variety in the sense of Definition 4.1,
since it may be non-normal.
Example 4.13.
Let ,
with and the
saturated
sublattice generated by
. Let be the fan in
of Example 3.70. Then with
projective coordinates . The fan
induced in has three cones: . Thus . Let be a point of . Then
. Therefore,
is the curve of equation
In general, this curve is not normal. Hence it is not a toric variety.
4.3. -Cartier divisors and toric line bundles
When studying toric varieties, the objects that admit a combinatorial
description are those that are compatible with the torus action. These
objects are enough for many purposes. For instance, the divisor class
group of a toric variety is generated by invariant divisors.
Let
denote the projection to the second factor and
the torus action. A Cartier divisor is invariant
if and only if
Definition 4.14.
Let the a toric
variety with torus .
A Cartier divisor on is called a -Cartier
divisor
if it is
invariant under the action of on .
The combinatorial description of -Cartier divisors is done in
terms of virtual support functions.
Definition 4.15.
Let be a fan in .
A
function is called a
virtual support function on
if it is a conic -lattice function (Definition 3.88).
Alternatively, a virtual support function is a
function such that, for every cone
, there exists with for all .
A set of functionals as above
is called a
set of defining vectors of .
A concave virtual
support function on a complete fan will be called a support function.
A support function on a complete fan in the sense of the previous definition, is the
support function of a polytope as in Example 3.16:
it is the support function of the polytope
where is the subset of -dimensional cones of .
Two vectors
define the same functional on a cone if and only if .
Hence, for a given virtual support function
on a fan , each defining vector
is unique up to the orthogonal space . In particular, is uniquely defined for and, in the other
extreme, can be any point of .
Let be a set of defining vectors of .
These vectors have to satisfy the
compatibility condition
(4.16)
On each open set , the vector determines a
rational function . For , the above compatibility condition implies that
is a regular function on the overlap
and so
determines a Cartier divisor on :
(4.17)
This Cartier divisor does not depend on the choice of defining vectors
and it is a -Cartier divisor. All -Cartier divisors are
obtained in this way.
Theorem 4.18.
Let be a fan in and
the corresponding toric variety. The
correspondence is a bijection
between the set of virtual support functions on
and the set of -Cartier divisors on . Two
Cartier divisors and are rationally equivalent
if and only if the function is linear.
We next recall the relationship between Cartier divisors and line
bundles in the toric case.
Definition 4.19.
Let be a toric variety and a line
bundle on . A toric structure
on is the choice of a
non-zero vector on the fibre
over the distinguished point. A
toric line bundle
is a pair , where is a line bundle
on and is a toric structure on .
A rational section of a toric line bundle
is a toric section
if it is regular and nowhere
vanishing on the principal open subset , and .
In order not to burden the notation, a toric line bundle will
generally be denoted by , the vector being implicit.
Remark 4.20.
The terminology “toric structure”, “toric line bundle” and “toric section”
comes from the fact that the total space of a toric line bundle
admits a unique structure of
toric variety satisfying the conditions:
(1)
is the distinguished point of the
principal open subset;
(2)
the structural morphism is a toric
morphism;
(3)
for each point and vector , the morphism , given
by scalar multiplication , is equivariant;
(4)
every toric section
determines a toric morphism , where is the
invariant open subset of regular points of .
This can be shown using the construction of as a toric
variety in [Oda88, Proposition 2.1].
Remark 4.21.
Every toric line bundle equipped with a toric section admits a
unique structure of -equivariant line bundle such that the toric section
becomes an invariant section. Conversely, every -equivariant
toric line bundle
admits a unique invariant toric section. Thus, there is a natural
bijection between the space of -equivariant toric line bundles
and the space of toric line bundles with a toric section. In
particular, every line bundle admits a structure of -equivariant line
bundle. This is not the case for higher rank vector
bundles on toric varieties, nor for line bundles on other spaces with group
actions like, for instance, elliptic curves.
To a Cartier divisor , one associates an invertible
sheaf of fractional ideals of , denoted
. When is a -Cartier divisor given by a set
of defining vectors, , the sheaf
can be realized as the subsheaf of
-modules generated, in each open subset
, by the rational function . The
section provides us with a distinguished
rational
section such that . Since is supported on
the complement of the principal open subset, is regular and
no-where vanishing on . We set
. This is a toric structure on . From
now on, we will assume that is equipped with this toric
structure. Then is a
toric line bundle with a toric section.
Theorem 4.22.
Let be a toric variety with torus . Then
the
correspondence
determines a bijection between
the sets of
(1)
-Cartier divisors on ,
(2)
isomorphism classes of pairs where is a toric line
bundle and is a toric section.
Proof.
We have already shown that a -Cartier divisor produces a toric line
bundle with a toric section. Let now be a toric line bundle
equipped with a toric
section and the fan that defines . Since every line
bundle on an affine toric variety
is trivial, for each we can find a section
that generates on and
such that . Since is regular and
nowhere vanishing on and , we
can find elements such
that , because any
regular nowhere vanishing function on a torus is a constant times a
monomial. The elements
glue together to define a virtual support function
on that does not depend on the chosen
trivialization. It is easy to see that the correspondence
is the inverse of the previous one, which
proves the theorem.
∎
Thanks to this result and Theorem 4.18, we can freely move
between the languages of virtual support functions, -Cartier
divisors, and toric line
bundles with a toric section.
Notation 4.23.
Let be a virtual support function. We will write
for the toric line bundle with
toric section
associated to the -Cartier divisor by Theorem
4.22. When we do not need to make explicit the vector ,
we will simply write .
We next recall the relationship between Cartier divisors and Weil
divisors in the toric case.
Definition 4.24.
A -Weil divisor on a toric variety
is a finite formal linear combination of hypersurfaces of which are
invariant under the torus action.
The invariant hypersurfaces of a toric variety are
particular cases of the toric subvarieties
considered in the previous section: they are the varieties of the form
for .
Hence, a -Weil divisor is a finite formal linear combination
of subvarieties of the form for .
Since the toric variety is normal,
each Cartier divisor determines a Weil divisor. This correspondence
associates to the
-Cartier divisor , the -Weil divisor
(4.25)
where is the smallest nonzero lattice point in .
Example 4.26.
We continue with the notation of examples
3.76 and 4.3. The fan has
rays. For each , the closure of the orbit
corresponding to the ray generated by the vector is the
standard hyperplane of
The function is a support function on
and the -Weil divisor associated to
is .
For a toric variety of dimension , we denote by
its group of -Cartier divisors, and by
its group of -Weil divisors.
Recall that , the Picard group of ,
is the group of
isomorphism classes of line bundles. Let
denote the Chow group of cycles of dimension .
The following result shows that these
groups can computed in terms of invariant divisors.
Theorem 4.27.
Let be a fan in that is not contained in
any hyperplane. Then there is a commutative diagram with exact rows
In the previous theorem, the hypothesis that is not
contained in any hyperplane is only needed for the injectivity of
the second arrow in each row of the diagram.
In view of Theorem 4.22, the upper exact sequence of the
diagram in Theorem 4.27 can be interpreted as follows.
Corollary 4.29.
Let be a toric variety with torus .
(1)
Every toric line bundle on admits a toric
section. Moreover, if and are two toric
sections, then there exists such that .
(2)
If the fan that defines is not contained in any
hyperplane, and and are toric line bundles on
, then there is at most one isomorphism between them.
We next study the intersection of a -Cartier divisor with the
closure of an orbit. Let be a fan in and
the virtual support function on
given by the set of defining vectors . Let be a cone of and the associated closed
immersion. We consider first the case when .
Let be another cone of . For vectors
and such that , the condition implies
because .
Hence, we can define a function
(4.30)
for any such that .
It is easy to produce
a set of defining vectors of . For
each cone we denote by
the corresponding cone in . Since , then . We set .
Proposition 4.31.
Let notation be as above. If , then
intersects properly and . Moreover, is a set of defining vectors of .
Proof.
The -Cartier divisor is given by . If , the local equation of in
is . Therefore, the orbit
does not meet the support of . Hence and
intersect properly.
To see that is a set of defining vectors, we
pick a point and we choose such
that . Then
which proves the claim. Now, using
the characterization of in terms of defining
vectors, we have
∎
When , the cycles and do not
intersect properly, and we can only intersect with
up to rational equivalence. To this end, we choose any
such that for every . Then the divisor is rationally
equivalent to and .
By the above result, this divisor intersects
properly, and its restriction to is given by the
virtual support function .
Example 4.32.
We can use the above description of the restriction of
a line bundle to an orbit to compute the degree of an orbit of
dimension one. Let be a complete fan and
. Hence is a toric curve. Let and
be the two -dimensional cones that have as a common
face. Let be a virtual support function. Choose
such that is a generator of the
lattice . Then, by (4.25) and (4.30),
(4.33)
Let now be a toric line bundle on and
. The line bundle on
has an
induced toric structure. Let be a
toric section of that is regular and nowhere vanishing on
, and set . If is another such section, then
for an such that , by
Corollary 4.29. Therefore . Hence, does not depend on the choice of section and
is the induced toric line
bundle. The following result follows easily from the constructions.
Proposition 4.34.
Let be a toric line bundle on
and . Let be a virtual
support function such that and as toric line
bundles. Then .
We next study the inverse image of a -Cartier divisor with respect
to equivariant morphisms as those in Theorem 4.9. Let
, , , and let and be as in Theorem 4.9. Let
be the associated equivariant morphism, a
virtual support function on and
a set of defining vectors
of . For each cone we choose a cone
such that and we
write . The following result
follows easily from the definitions
Proposition 4.35.
The divisor intersects properly the image of
. The function
is a virtual support function on and
Moreover, is a set of defining
vectors of .
Remark 4.36.
If is a toric line bundle on and is
a toric morphism, then has an induced toric
structure.
Namely, . By contrast, if
is a general
equivariant morphism that meets the principal open subset, there is no
natural toric structure on , because
the image of the distinguished point does not need to
agree with . If is a toric line bundle equipped with
a toric section, then we set . However,
the underlying toric bundle of depends on
the choice of the toric section.
4.4. Positivity properties of -Cartier divisors
Let be a fan in and
a virtual support function on .
In this section, we will assume that is complete or,
equivalently, that the variety is proper.
Many geometric properties of the pair
can be read directly from . For instance,
is generated by global sections if and only
if the function is
concave,
and the line bundle
is ample if and only if is strictly concave on .
In the latter case, the fan agrees with the polyhedral
complex (Definition 3.34) and the pair
is completely determined by . Thus, the
variety is projective if and only if the fan
is complete and regular (Definition 3.60).
We associate to the subset of
This set is either empty or a lattice polytope.
When is generated by
global sections, the polytope agrees with , and is the support
function of .
The polytope encodes a lot of information about
the pair .
For instance,
we can read from it the space of global sections of .
A monomial rational section
, , is a regular global
section of if and only if . Moreover, the set is a
-basis of the space of global sections .
In the sequel we will see many more examples of this principle.
Proposition 4.37.
Let , , be -Cartier divisors on
generated by their global sections. Then
(4.38)
where denotes the mixed volume function associated to the
Haar measure on (Definition 3.109). In
particular, for a -Cartier divisor generated by its
global sections,
The intersection multiplicity and the degree in the above
Proposition only depend on the isomorphism class of the line bundles
and not on the -Cartier divisors
themselves. It is easy to check directly that the right-hand sides of
(4.38) and
(4.39) only depends on the isomorphism class of the line
bundles. In
fact, let be a toric line bundle generated by global sections
and , two toric
sections. For , set and let
be the corresponding support function and the
associated polytope. Then
for some . Thus and . Since the volume and the mixed volume are invariant under
translation, we see that these formulae do not depend on the choice
of sections.
Definition 4.41.
A polarized toric variety
is a pair , where is a toric variety and is an
ample -Cartier divisor.
Polarized toric varieties can be classified in terms of their polytopes.
Theorem 4.42.
The correspondence is a bijection between the set of
polarized
toric varieties
and the set of lattice
polytopes of
dimension of .
Two ample -Cartier divisors
and on a toric variety are rationally
equivalent if and only if is the
translated of by an element of .
Proof.
If is a
strictly concave function on , then
is an
-dimensional lattice polytope.
Conversely, if is a lattice polytope in , then
, the support function of , is a strictly
concave function on
the complete fan (see
examples 3.71 and 3.76). Therefore, the result
follows from Theorem
4.18 and the construction of Remark 4.40.
∎
Remark 4.43.
When is only generated by its
global sections, the polytope may not determine the
variety , but it does determine a polarized toric
variety that is the image of by a toric morphism.
Write for
short. Let be as in Notation
3.103 and choose . Set
. The translated polytope
has the same dimension as its ambient space
. By the theorem above, it defines a complete fan
in together with a support
function . The projection
induces a toric morphism
the divisor is ample, and
.
Example 4.44.
The projective morphisms associated to
-Cartier divisors generated by global sections can also be made
explicit in
terms of the lattice points of the associated polytope.
Consider a complete toric variety of dimension
equipped with a
-Cartier divisor generated by global sections.
Let be such that
. These vectors determine an
H-representation
. Let be
the linear map defined by .
By Lemma
3.79, .
In we
consider the fan , whose associated toric
variety is . One easily verifies
that,
for each , there is with .
Let be an arbitrary rational point of the
principal open subset of .
The equivariant morphism
can be written explicitly as . Moreover, .
The orbits of a polarized toric variety are in
one-to-one correspondence with the
faces of .
Proposition 4.45.
Let be a complete fan in
and a strictly concave function on . The
correspondence is a bijection between the
set of faces of and the set of the orbits under the
action of on .
Equation (4.25) gives a formula for the Weil divisor
in terms of the virtual support function . When the line bundle
is ample, we can
interpret this formula in terms of the facets of the polytope .
Let be an
ample line bundle on . The polytope has
maximal dimension . For each facet of ,
let be as in Notation 3.103. The ray is a cone of .
Proposition 4.46.
With the previous hypothesis,
where the sum is over the facets of .
Proof.
Since is strictly concave on , the Legendre-Fenchel
correspondence shows that the set of rays of the form
agrees with the set . Moreover, , because is the support function of
. The proposition then follows from (4.25).
∎
For a -Cartier divisor generated by global sections, we can
interpret its intersection with the closure of an orbit, and its inverse
image with respect to an equivariant morphism, in terms of direct and
inverse images of concave functions.
Proposition 4.47.
Let be a complete fan in
and a
support function on .
(1)
Let , the
associated face of , and
. Let be the natural projection. Then
(4.48)
In particular, the restriction of to
is given by the concave function .
Moreover, the
associated polytope is
(4.49)
(2)
Let be a linear map and
its dual map, where . Let
be a
fan in such that, for each there is
with , and let . Then
(4.50)
and the associated polytope is
(4.51)
Proof.
Equation (4.48) follows from (4.30), while equation
(4.50) follows from Proposition 4.35. Then
(4.49) and (4.51) follow from Proposition
3.78.
∎
As a consequence of the above construction, we can compute easily the
degree of any orbit.
Corollary 4.52.
Let be a complete fan in ,
a support function on
, and a cone of dimension
. Then
Proof.
In view of equations (4.49) and (4.39), it is enough to
prove that . But this follows from the
fact that (see Notation 3.103).
∎
Example 4.53.
Let . The degree of the curve
agrees with the lattice length of .
We will also need the toric version of the Nakai-Moishezon
criterion.
Theorem 4.54.
Let be a proper toric variety and
a -Cartier divisor on .
(1)
The following properties are equivalent:
(a)
is ample;
(b)
for every curve in ;
(c)
for every .
(2)
The following properties are equivalent:
(a)
is generated by its global sections;
(b)
for every curve in ;
(c)
for every .
Proof.
This follows from [Oda88, Theorem 2.18] for non singular toric
varieties, and from [Mav00] for the general case.
∎
4.5. Toric schemes over a discrete valuation ring
In this section we recall some basic facts about the algebraic
geometry of toric schemes over a DVR. These toric
schemes were introduced in
[KKMS73, Chapter IV, §3], and we refer to this reference
for more details. They are described and classified in terms of
fans in . In this section
we will mostly consider
proper toric schemes over a DVR. As a
consequence of Corollary 3.15, proper toric schemes over a DVR can be
described
and classified in terms of complete SCR polyhedral
complexes in as, for instance, in
[NS06].
Let be a field equipped with a nontrivial discrete valuation
. In
this section
we do not assume to be complete.
As usual, we denote by
the valuation ring, by
its maximal ideal, by a generator of and by
the residue
field. We assume that .
We denote by the base scheme , by and
the generic and the special points of and,
for a scheme over , we set
and
for its generic and special fibre
respectively.
We will denote by a
split torus over . Let , and be as in
§4.1. We will write and .
Definition 4.55.
A toric scheme over of relative dimension
is a normal integral separated -scheme
of finite type, , equipped with a dense open embedding
and an -action of
over that extends the action of on itself by
translations. If we want to stress the torus acting on we will
call them toric schemes with torus .
If is a toric scheme over , then
is a toric variety over with torus .
Definition 4.56.
Let be a toric variety over with
torus and let be a toric scheme over with
torus . We say that is a toric model of
over
if the identity of can be extended to an isomorphism
from to .
If and are toric models of and is an -morphism, we say that is a morphism
of toric models
if its restriction to is the identity.
Since, by definition, a toric scheme is integral and contains as a
dense open subset, it is flat over . Thus a toric model
is a particular case of a model as in
Definition 2.11.
Let be a fan in .
To the fan we associate a toric scheme
over .
Let be a cone and its dual cone.
Set .
Let
be the semigroup
-algebra of .
By definition, . Thus is an ideal of
.
There is a natural isomorphism
(4.57)
that we use to identify both rings. The ring is an integrally closed domain.
We set
for the associated affine toric scheme over .
For short we will use the notation
(4.58)
For cones , with we have a natural open immersion of affine schemes
. Using these open
immersions as gluing data, we define the scheme
This is a reduced and irreducible normal scheme of finite type over
of relative dimension .
There are two types of cones in . The ones that are
contained in the hyperplane , and the ones that
are not. If is contained in , then
, and is invertible in
. Therefore ; hence is contained in the
generic fibre and it agrees with the affine toric variety . If is not contained in , then
is not contained in the generic fibre.
To stress the difference between both types of affine schemes we will
follow the following notations.
Let be the SCR polyhedral complex in obtained by
intersecting by the hyperplane
as in Corollary 3.15, and
the fan in obtained by intersecting
with .
For , the cone
is not contained in . We will write , , and
.
Given polyhedrons ,
with , we have a natural open immersion of affine toric schemes
.
Moreover, if a cone
is a face of a cone for some
,
then the affine toric variety , is also
an open subscheme of . The open cover (4.58)
can be written as
We will
reserve the notation , for the affine
toric schemes that are not contained in the generic fibre and denote
by , the affine toric schemes
contained in the generic fibre, because they are toric varieties
over .
The scheme corresponding to the polyhedron
is a
group -scheme which is canonically isomorphic to .
The -action of over
is constructed as in the case of varieties over a
field. Moreover there are open immersions
of schemes over and the action of on extends the
action of on itself.
Thus is a toric scheme over .
Moreover, the fan defines a toric variety
over which coincides with the generic fibre .
Thus, is a toric model of .
The special fibre
has an induced action by , but, in general, it
is not a toric variety over , because it
is not irreducible nor reduced. The reduced schemes
associated to
its irreducible components are toric varieties
over with this action.
Every toric scheme over can be obtained by the above
construction. Indeed, this
construction gives a classification of
toric schemes by fans in
[KKMS73, §IV.3(e)].
If the fan is complete,
then the scheme is proper over . In this case the set
is an open cover of
. Proper toric schemes over can also be classified by complete
SCR polyhedral complexes in . This
is not the case for general toric schemes over as is shown in [BS10].
Theorem 4.59.
The correspondence , where is the fan introduced
in Definition 3.7,
is a bijection between the set of complete SCR polyhedral
complexes in and the set of isomorphism classes of
proper toric schemes over of relative dimension .
Proof.
Follows from [KKMS73, §IV.3(e)]
and Corollary 3.15.
∎
If we are interested in toric schemes as toric models of a toric
variety, we can restate the previous result as follows.
Theorem 4.60.
Let be a complete fan in . Then
there is a bijective correspondence between equivariant
isomorphism classes of proper toric models over
of and complete SCR polyhedral complexes in
such that .
For the rest of the section we will restrict ourselves to the proper
case and we will denote by a complete SCR polyhedral
complex.
To it we associate a complete fan in and a complete fan in .
For short, we will use the notation
(4.61)
and we will identify the generic fibre with the
toric variety .
Example 4.62.
We continue with Example 4.3. The fan is in particular an SCR polyhedral complex and
the associated toric scheme over is , the
projective space over .
This example can be generalized to any complete fan in
.
Definition 4.63.
Let be a complete fan in
. Then is also a complete SCR polyhedral complex.
Clearly .
The toric scheme is a model over of
which is called the canonical model.
Its special fibre
is the toric variety over defined by the fan .
The description of toric orbits
in the case of a toric scheme over a
DVR is more involved than the case of toric
varieties over a field, because we have to consider two kind of orbits.
In the first place, there is a bijection between
and the set of orbits under the action of on ,
that sends a cone to the orbit as in the case of toric varieties
over a field. We will denote by the Zariski closure in
of
the orbit
with its structure of reduced closed subscheme. Then
is a horizontal -scheme,
in the sense that the structure morphism is dominant, of relative dimension .
Next we describe as a toric scheme over .
As before, we write
and let be the linear projection. Each polyhedron
such that defines a polyhedron in . One verifies that these polyhedra form a
complete SCR
polyhedral complex in , that we denote . This polyhedral complex is called the star of
in .
Proposition 4.64.
There is a canonical isomorphism of toric schemes
Proof.
The proof is analogous to the proof of Proposition 4.6.
∎
In the second place, there is a bijection between and the set of
orbits under the action of on over the closed point
. Given a polyhedron , we set
We denote .This is a torus
over the residue field of dimension . There is a
surjection of rings
Since the element does not belong to
, then this surjection sends the ideal to zero. Therefore, it factorizes through a surjection
, that defines a closed immersion . The subscheme
is contained in the special
fibre , because the surjection sends
to zero. By this reason, the orbits of this type will be called
vertical.
We will denote by the Zariski closure of
the orbit
. Then, is a vertical cycle in the sense
that its image by the structure morphism is the closed point .
We next describe its toric structure.
For each polyhedron such that is a face of
, the image of
under the projection is a strongly convex rational cone that we denote
. The cones form a fan
of that we denote . Observe
that the fan is the analogue of the star of a cone
defined in (4.5).
For each cone
there is a unique polyhedron such that
is a face of and .
Proposition 4.65.
There is a canonical isomorphism of toric
varieties over
Proof.
Again, the proof is analogous to the proof of Proposition
4.6.
∎
The description of the adjacency relations between orbits is similar
to the one for toric varieties over a field.
The
orbit is contained in
if and only if the polyhedron is
a face of
the polyhedron . Similarly, is contained in
if and only if is a face of .
Finally, is contained in if and only if
is a face of
the cone .
Remark 4.66.
As a consequence of the above construction, we see that there is a
one-to-one correspondence between the
vertexes of and the components of the special fibre. For each
, the component is a toric variety over
defined by the fan in .
The orbits contained in correspond to the polyhedra
containing . In particular, the components given by two vertexes
share an
orbit of dimension if and only if there exists a polyhedron
of dimension containing both and .
To each polyhedron , hence to each vertical orbit, we can
associate a combinatorial invariant,
which we call its multiplicity. For a vertex , this
invariant agrees with the order of vanishing of
along the component (see (4.87)).
Denote by the inclusion and by
the projection . We identify
with its image. We set
Remark 4.67.
The lattice can also be described as
. Therefore, for a cone ,
the notation just introduced agrees with the one
in (4.4). Here, the polytope is contained in
. By contrast, for a polyhedron ,
we follow
Notation 3.103, so
.
Then and induce inclusions of lattices of finite index
and , that we denote also
by and , respectively.
These inclusions are dual of each other and in particular,
their indexes agree.
Definition 4.68.
The multiplicity of a polyhedron
is defined as
Lemma 4.69.
If ,
then
.
Proof.
We consider
the inclusion that sends to the
class of . There is a commutative diagram with exact rows and columns
It is easy to see that the bottom arrow in the diagram
is an isomorphism. By the Snake lemma the right vertical arrow is an
isomorphism. Therefore
We verify that
from which the lemma follows.
∎
We now discuss equivariant morphisms of toric schemes.
Definition 4.70.
Let , , be split tori over and a morphism of algebraic group schemes.
Let be toric schemes over with torus and let
denote the corresponding action.
A morphism is -equivariant
if
the diagram
commutes. A morphism is
-toric
if its restriction to , the torus over ,
coincides with that of .
It can be verified that a toric morphism of schemes over is also
equivariant.
In the sequel, we extend the construction of equivariant
morphisms in §4.2 to proper toric schemes. Before that, we
need to relate rational points on
the open orbit of the toric variety with lattice points in .
Definition 4.71.
The valuation map of the field,
, induces a
valuation map on ,
also denoted , by the
identifications
and .
Let , , be split tori over . For each , let
be the corresponding lattice and a complete
SCR polyhedral complex in .
Let be an affine map
such that, for every , there exists
with .
Let such that .
Write , where is a linear map. induces a morphism of algebraic groups
Let . For each cone , there exists a cone with
. Therefore and define an
equivariant morphism of toric varieties over as in Theorem 4.9.
Proposition 4.72.
With the above hypothesis,
the morphism can be extended to a
-equivariant morphism
Proof.
Let such that . Then the map given by
for and (which is just the dual of the
linearization of ) induces a
morphism of semigroups . Since
belongs to
, the assignment
defines a ring morphism . This morphism sends
to , hence induces a
morphism and a map . Varying and we
obtain maps, that glue together into a map
By construction, this map extends and is
equivariant with respect to the morphism .
∎
As an example of the above construction, we consider the toric
subschemes associated to orbits under the
action of subtori. Let be a lattice, a complete SCR
polyhedral complex in and set .
Let be a saturated sublattice and let .
We set .
We
consider the affine map given by
. Recall that the sublattice and the point induce
maps of toric varieties (4.11)
We want to identify the toric model of induced by
the toric model of .
We define the complete SCR polyhedral complex
of . Then, .
Applying the construction of Proposition 4.72,
we obtain an equivariant morphism of schemes over
(4.73)
The image of this map is
the Zariski closure of and is a
toric model of . This map will be denoted either as
or .
Observe that the abstract toric scheme only
depends on and on .
4.6. -Cartier divisors on toric schemes
The theory of -Cartier divisors carries over to the case of
toric schemes over a DVR. Let be a toric
scheme over with torus .
There are two morphisms from to
: the toric action, that we denote by ,
and the second projection, that we denote by .
A Cartier divisor on is called a
-Cartier divisor
if
-Cartier divisors over a toric scheme can be described
combinatorially.
For simplicity, we will discuss only the case of
proper schemes. So, let be a
complete SCR polyhedral complex in , and the
corresponding toric scheme.
Let be an H-lattice function on
(Definitions 3.88 and 3.60).
Then defines a -Cartier
divisor in a way similar to the one for toric varieties
over a field.
We recall that the schemes form
an open cover of .
Choose a set of defining vectors
of . Then we set
where we are using the identification (4.57).
The divisor
only depends on and not on a particular choice of defining vectors.
We consider now toric varieties and -Cartier divisors over
as models of toric varieties and -Cartier divisors over .
Definition 4.74.
Let be a complete fan in and a virtual
support function on . Let be the
associated toric variety and -Cartier divisor defined over .
A toric model of
is a triple
, where is a toric model over
of ,
is a -Cartier divisor on and is an integer such that the isomorphism
that extends the identity of satisfies
.
When , the toric model will be denoted simply by
. A toric model will be
called proper
whenever the scheme is proper over .
Example 4.75.
We continue with Example
4.62. The function is an H-lattice
concave function on and
is a proper toric model of
.
This example can be generalized as follows.
Definition 4.76.
Let be a complete fan in
and let be a virtual support function on . Then
is a complete SCR polyhedral complex in and
is
a rational piecewise affine function on . Then
is a model over
of , which is called the
canonical model.
Definition 4.77.
Let be a toric scheme and a
line bundle on . A toric structure
on is the choice of an
element of the fibre , where is the distinguished point.
A toric line bundle
on is a
pair , where is a line bundle over and
is a toric structure on . Frequently, when the toric
structure is clear from the context, the element
will be omitted from the notation and a toric line bundle will
be denoted by the underlying line bundle.
A toric section
is a rational
section that is regular and non vanishing over the principal open
subset and such that . Exactly as in the case
of toric varieties over a field, each -Cartier divisor defines a
toric line bundle together with a toric section. When the
-Cartier divisor comes from an H-lattice function , the
toric line bundle and toric section will be denoted
and respectively.
In this section we will mainly use the language of -Cartier
divisors, but in §6 we will prefer the
language of toric line bundles.
The following result follows directly form the definitions.
Proposition 4.78.
Let be a toric
variety with a -Cartier divisor.
Every toric model of
induces a model of , in the sense of Definition
2.16, where the identification of with matches the toric
sections. Such models will be called
toric models.
Proposition-Definition 4.79.
We say that two toric
models , , are
equivalent,
if there
exists a toric model
of and morphisms of
toric models , , such that
. This is an
equivalence relation.
Proof.
Symmetry and reflexivity are straightforward. For transitivity assume
that we have toric models ,
, that the first and second model are equivalent
through and that the second and the third are
equivalent through . Then, by Theorem
4.60, and
are defined by SCR polyhedral complexes and
respectively, with . Let
. By Lemma 3.11,
. Thus determines a model of
. This model has morphisms and
to
and respectively. We put and
. Now it is
easy to verify that provides the
transitivity property.
∎
We are interested in proper toric models and equivalence classes
because, by Definition 2.17, a proper toric model of induces an algebraic metric on .
By Proposition 2.18, equivalent toric models define the same
algebraic metric.
We can classify proper models of -Cartier divisors (and therefore of
toric line bundles) in terms of H-lattice functions. We first recall
the classification of -Cartier divisors.
Theorem 4.80.
Let be a complete SCR polyhedral complex
in and let be the associated toric scheme
over . The correspondence is an isomorphism
between the group of H-lattice functions
on and the group of -Cartier divisors on . Moreover, if and are two H-lattice
functions on , then the divisors and are rationally equivalent if and only if is affine.
We next derive the classification theorem for models of -Cartier divisors.
Theorem 4.81.
Let be a complete fan in
and a virtual
support function on .
Then the correspondence is a
bijection between:
the set of pairs , where is a complete SCR polyhedral complex in
with = and is an H-lattice function
on such that ;
the set of isomorphism
classes of toric models of .
Proof.
Denote by
the open immersion of the generic fibre.
The recession function (Definition 3.85) determines the
restriction of the -Cartier
divisor to the fibre over the generic point. Therefore,
when is an H-lattice
function on with , we have that
(4.82)
Thus is a toric model of . The statement follows from Theorem
4.60 and Theorem 4.80.
∎
Remark 4.83.
Let be a complete fan in
and a virtual
support function on . Let be a toric model of
. Then, by Theorem 4.81, there exists a
complete SCR polyhedral complex in with
and a rational piecewise affine function on such that is an H-lattice function, and . Moreover, if
is another toric model that gives the function , then
both models are equivalent if and only if .
Thus, to every toric model we have associated a rational piecewise
affine function on such that . Two equivalent models give rise to the same function.
The converse is not true.
Given a rational piecewise affine function , with , we can find a complete SCR polyhedral complex such
that is piecewise affine on . But, in general
does not agree with . What we can expect is
that
is a refinement of . Therefore the function
gives us an equivalence
class of toric models of . But
may not determine an equivalence class of
toric models of . In Corollary 5.43
in next section we
will give a necessary condition for a function to define an
equivalence class of toric models of and
in Example 5.44 we will exhibit a function that does not
satisfy this necessary condition. By
contrast, as we will see in Theorem 4.97, the concave case
is much more transparent.
The correspondence between -Cartier divisors and -Weil
divisors has to take into account that we have two types of
orbits. Each vertex defines a vertical
invariant
prime Weil divisor and every ray defines
a horizontal prime Weil divisor . If is a
vertex, by Lemma 4.69, its multiplicity is
the smallest positive integer such
that . If is a ray, we denote
by the smallest lattice point of .
Proposition 4.84.
Let be an H-lattice function on . Let be the
associated -Cartier divisor. Then the corresponding -Weil
divisor is given by
(4.85)
Proof.
By Lemma 4.69, for , the vector
is the minimal lattice vector in
the ray . Now it is easy to adapt
the proof of [Ful93, §3.3, Lemma] to prove this proposition.
∎
Example 4.86.
Consider the constant H-lattice function
. This function corresponds to the principal divisor
. Then
(4.87)
Thus, for a vertex , the multiplicity of agrees with the
multiplicity of the divisor in the special fibre . In particular, the special fibre is reduced if and only
if all vertexes of belong to .
We next study the restriction of -Cartier divisors to orbits and
their inverse image by equivariant morphisms. Let be a complete
SCR polyhedral
complex in , and an H-lattice
function on . Set , and
. Choose sets of defining vectors
and
for and , respectively.
Let . We describe the restriction of
to , the closure of a horizontal orbit. As in the
case of toric varieties over a field, we first consider the case when
.
Recall that agrees with the toric scheme associated to the
polyhedral complex and that each element of is the image by of a
polyhedron with
. The condition implies
that we can define
(4.88)
for any such that . The function can also be described in terms of defining
vectors. For each with , we will denote for its image by
. For each as before, the condition
implies that . Hence we
define for with .
Proposition 4.89.
If then the divisor
and the horizontal orbit intersect
properly. Moreover, the set is a set of defining vectors
of and the restriction of to
is .
Proof.
The proof is analogous to the proof of Proposition 4.31.
∎
If , then and
do not intersect properly and we can only restrict with
up to rational equivalence. To this end, we consider the divisor
, that is rationally
equivalent to and intersects
properly with . The restriction of
this divisor to corresponds to the H-lattice function
as defined above.
Let now be a polyhedron. We will denote by
and the projections and by
and the dual maps. We will use
the same notation for the linear maps obtained by tensoring with .
We first assume that .
If , then there exists a polyhedron with a
face of and a point that
is sent to under the projection . Then we set
(4.90)
The condition implies that the above equation
does not depend on the choice of .
We can describe also in terms of defining vectors.
For each cone let be the polyhedron that has as a face and such that
is mapped to by . The
condition implies that . We set .
Proposition 4.91.
If then the divisor intersects
properly the orbit . Moreover, the set is a set of defining vectors of
and the restriction of to is the divisor .
Proof.
The proof is analogous to that of Proposition 4.31.
∎
As before, when , we can only restrict to
up to rational equivalence. In this case we just apply
the previous proposition to the function .
Example 4.92.
We particularize (4.90) to the case of one-dimensional vertical
orbits.
Let be a -dimensional
polyhedron. Hence is a vertical curve. Let and
be the two -dimensional polyhedron that have as a common
face. Let
such that the class is a generator of the
lattice and the affine space meets . This second condition fixes one of the
two generators of . Then, by equation (4.25)
(4.93)
We end this section discussing the inverse image of a -Cartier
divisor by an equivariant morphisms. With the notation of Proposition
4.72, let be an H-lattice function on , and
a set
of defining vectors of . For each we
choose a polyhedron such that . We set and
. The following
proposition follows easily.
Proposition 4.94.
The divisor intersects properly the image of
. The function
is an H-lattice function on and
Moreover, is a set of defining
vectors of .
4.7. Positivity on toric schemes
The relationship between the positivity of the line bundle and the
concavity of the virtual support function can be extended to the case
of toric schemes over a DVR. In particular, we have the following
version of the Nakai-Moishezon criterion.
Theorem 4.95.
Let be a complete SCR complex in and
its associate toric scheme over . Let be an
H-lattice function on and
the corresponding -Cartier divisor on .
(1)
The following properties are equivalent:
(a)
is ample;
(b)
for every vertical
curve contained in
;
(c)
for every
-dimensional polyhedron
;
(d)
The function is strictly concave on .
(2)
The following properties are equivalent:
(a)
is generated by global sections;
(b)
for every vertical
curve contained
in ;
(c)
for every
-dimensional polyhedron
;
(d)
The function is concave.
Proof.
In both cases, the fact that (a) implies
(b) and that (b) implies (c) is
clear. The fact that (c) implies (d)
follows from equation (4.93). The fact that
(1d) implies (1a) is
[KKMS73, §IV.3(k)].
Finally, we prove that
(2d) implies (2a). Let be an
H-lattice concave function. Each pair
defines a rational section of
. The section is regular if and only if the function
lies above . Moreover, for a polyhedron , this section does not vanish
on if and only if for all . Therefore, the affine pieces of the graph of
define a set of global sections that generate .
∎
Definition 4.96.
We will say that a -Cartier divisor on
a toric scheme is
semipositive
if it is generated by global sections.
Let be a proper toric variety over and let
be a -Cartier divisor generated by
global sections. A toric model is called
semipositive
if is semipositive.
Observe that, by Theorem 4.95, a toric model is semipositive
if the associated metric
is semipositive as in Definition 2.26.
Equivalence classes of semipositive toric models are classified by
rational concave functions.
Theorem 4.97.
Let be a complete fan in . Let
be a support function on .
Then the correspondence of Theorem 4.81
induces
a bijective correspondence between the set of rational piecewise affine concave
functions with
and the set of equivalence classes of
semipositive toric models of over .
Proof.
Let be a semipositive toric model. By Theorem
4.81,
to the pair corresponds a pair , where is an H-lattice function on ,
and . By Theorem 4.95, the function
is concave. We put . It is clear
that equivalent models produce the same function.
Conversely, let be a rational piecewise affine concave
function. Let . This is a rational polyhedral
complex. Let . This is a conic rational
polyhedral complex. By Proposition 3.72, . Since is a support function on , we
deduce that is a refinement of . Put (Definition 3.10). Since is a
rational polyhedral complex and is a fan, then is
an SCR polyhedral complex. Moreover, by Lemma 3.11, we have
Let be an
integer such that
is
an H-lattice function. Then is a
toric model of . Both procedures are
inverse of each other.
∎
Recall that, for toric varieties over a field, a -Cartier divisor
generated by global sections can be determined, either by the
support function or by its stability set . In
the case of toric schemes over a DVR, if is a
concave rational piecewise affine function on and , then the stability set of agrees with the
stability set of
. Then the equivalence class of toric models determined by
is also determined by the Legendre-Fenchel dual function .
Corollary 4.98.
Let be a complete fan in and a
support function on .
There is a bijection between equivalence classes of semipositive
toric models of
and
rational piecewise affine concave functions on , with
effective support .
Proof.
This follows from Theorem 4.97, Proposition 3.75
and Proposition 3.77.
∎
When is generated by global sections, that is, when
is concave, we can interpret
its restriction to toric orbits in terms of direct
and inverse images of concave functions.
Proposition 4.99.
Let be a complete SCR polyhedral complex in and
an H-lattice concave function on . Set and . Let and
such that . Let be the projection and
the dual
inclusion. Then
(4.100)
Hence the restriction of the divisor to
corresponds to the H-lattice concave function . Dually,
(4.101)
In other words, the
Legendre-Fenchel dual of is the
restriction of to the face translated
by .
Proof.
For equation (4.100),
we suppose without loss of generality that , and hence
. Let . Then, the function
is concave. Let
such that and . Then, is a polyhedron of maximal dimension
in . The restriction of to this polyhedron
is constant and, by (4.88), agrees with
. Therefore, by concavity,
agrees with . Thus we obtain equation
(4.100). Equation (4.101) follows from the previous
equation and Proposition 3.78(2). To prove
equation (4.101) when we use Proposition
3.40(4).
∎
We now consider the case of a vertical orbit. For a function
as before, with , we denote by
the concave function given by
Let and be as before and let . Let
and be such that . Let be the
projection, and
the
dual map.
Then
(4.104)
Moreover, this is a support function on the fan
. Its stability set is
the polytope . Hence, the restriction of the divisor to the variety
is the divisor associated to the support function of
Proof.
To prove equation (4.104) we may assume that
and . Let . Then, the
function is concave. Let
such that is a face of
and . Then, is a
polyhedron of maximal dimension of and the
restriction of to this polyhedron is constant and, by
equation (4.90), agrees with . Therefore,
by concavity,
Back in the general case when and
may be different from zero, by Proposition
3.78, Proposition 3.40(4) and Lemma
4.102 we have
The remaining statements are clear.
∎
We next interpret the above result in terms of dual polyhedral
complexes. Let and be the pair of
dual polyhedral complexes associated to . Since is
piecewise affine on , then is a refinement of . For each we will denote by the smallest element of that
contains . It is characterized by the fact that Let be the polyhedron . This polyhedron agrees with for any . Then the function is affine. The polyhedron is contained in .
The polyhedron
is a face of and it agrees with the intersection
of the image of with
this epigraph. We consider the commutative diagram of lattices
where is the inclusion ,
and the corresponding commutative diagram of real vector spaces
obtained by tensoring with . This diagram induces a commutative
diagram of polytopes
where all the arrows are isomorphisms.
In other words, the polytope associated
to the restriction of to
is obtained as follows. We include in throughout the affine map . The image of this map intersects
the polyhedron in the face of it that lies above
.
The inverse image of this face agrees with .
Since we have an explicit description of the polytope ,
we can easily calculate the degree with respect to of an
orbit .
Proposition 4.105.
Let be a complete SCR polyhedral complex in and an H-lattice concave function on . Let be a polyhedron of dimension , and .
Then
(4.106)
where is the multiplicity of (see
Definition 4.68).
Proof.
From the description of and Proposition
4.37, we know that
Since
the result follows from the definition of the multiplicity.
∎
Remark 4.107.
If , then both sides of (4.106) are
zero. If , then and agrees with the
lattice volume of .
We now interpret the inverse image of a semipositive -Cartier
divisor by an equivariant morphism in terms of direct and inverse images of concave
functions.
Proposition 4.108.
With the hypothesis of Proposition 4.72, let be an
H-lattice concave function on and let be
the corresponding semipositive -Cartier divisor. Then is the semipositive -Cartier
divisor associated to the H-lattice concave function . Moreover the Legendre-Fenchel dual is given by
Proof.
The first statement is Proposition 4.94. The second statement
follows from Proposition 3.78(1).
∎
Example 4.109.
Let be a complete fan in and a support
function on . By Theorem 4.97, any equivalence
class of semipositive models of is
determined by a rational piecewise affine concave function
with . By Lemma 3.79, any such function
can be realized as the inverse image by an affine map of the support
function of a standard simplex. Using the previous proposition, any
equivalence class of semipositive toric models can be induced by an
equivariant projective morphism.
More explicitly, let be an integer such that is an H-lattice concave
function. Let be a complete SCR complex in
compatible by and such that (see the
proof of Theorem 4.97). Then, is
a toric model of in the class determined
by .
Choose an H-representation
with for .
Put
. Let and
be as in
Lemma 3.79. In our case, is a morphism of lattices and
(4.110)
We follow examples 4.3, 4.26, 4.44 and
4.75, and consider as a toric scheme over .
Let be a rational point in the principal open
subset of such that .
One can verify that the hypothesis of Proposition 4.72 are
satisfied.
Let
be the associated morphism.
Then